Double Tapered Wedge
The flat top tapered wedge insert load is designed for high power handling capability within a small mounting area. The tapered configuration results in maximum surface area for thermal dissipation while maintaining typical VSWR of 1.05:1 or less.
Double Tapered Wedge – High Power Insert Loads
| Catalog Number |
EIA Designation WR (No.) |
Electronautic Reference Number |
Freq. (GHz) |
A. Max. (Inches) |
Avg. Power (Watts) |
| DTW-0160HP | 430 | W-6IL | 1.70-2.60 | 6.00 | 450 |
| DTW-0240HP | 340 | 3401IL | 2.2-3.3 | 10.00 | 700 |
| DTW-0280HP | 284 | S-6IL | 2.60-3.95 | 7.00 | 500 |
| DTW-0282HP 1/2 | 284 | – | 2.6-3.95 | 4.80 | 450 |
| DTW-0340HP | 229 | 229-7IL | 3.30-4.90 | 7.00 | 300 |
| DTW-0342HP | 229 | – | 3.30-4.90 | 6.00 | 300 |
| DTW-0370HP | 187 | C-3IL | 3.95-5.85 | 6.75 | 450 |
| DTW-0400HP | 159 | 519-2IL | 4.90-7.05 | 5.63 | 300 |
| DTW-0430HP | 137 | XB5IL | 5.85-8.20 | 4.50 | 350 |
| DTW-0490HP | 112 | XL-2IL | 7.05-10.0 | 4.50 | 300 |
| DTW-0491HP | 112 | XL-8IL | 7.05-10.0 | 3.00 | 250 |
| DTW-0550HP | 102 | 102-7IL | 7.0-11.0 | 5.50 | 250 |
| DTW-0580HP | 90 | X-5IL | 8.2-12.4 | 4.00 | 150 |
| DTW-0581HP | 90 | X-1IL | 8.2-12.4 | 2.25 | 100 |
| DTW-0700HP | 75 | 75-4IL | 10.0-15.0 | 2.50 | 80 |
| DTW-0730HP | 62 | KU-4IL | 12.4-18.0 | 2.75 | 150 |
| DTW-0735HP | 62 | – | 12.4-18.0 | 2.00 | 125 |
| DTW-0750HP | 51 | – | 15.0-22.0 | 2.25 | 100 |
| DTW-0760HP | 42 | – | 18.0-26.5 | 1.50 | 80 |
| DTW-0840HP | 34 | – | 22.0-30.0 | 3.00 | 25 |
| DTW-0820HP | 34 | – | 22.0-30.0 | 2.00 | 25 |
| DTW-0800HP | 28 | – | 26.0-40.0 | 2.00 | 20 |
| DTW-0801HP | 28 | – | 26.0-40.0 | .800 | 15 |
| DTW-0830HP | 22 | – | 33.0-50.0 | 2.00 | 30 |
